| 1. Importing CAD model of NREL Phase VI turbine into ANSYS Spaceclaim.mp4 | 20.8 MB | ||
| 1. Importing CAD model of NREL Phase VI turbine into ANSYS Spaceclaim.srt | 3.6 KB | ||
| 1. Introduction to course.mp4 | 27.8 MB | ||
| 1. Introduction to course.srt | 5.7 KB | ||
| 1. Introduction.mp4 | 61.6 MB | ||
| 1. Introduction.srt | 9.9 KB | ||
| 1. S809 airfoil coordinates.mp4 | 22.6 MB | ||
| 1. S809 airfoil coordinates.srt | 3.1 KB | ||
| 1.1 Fluent Case and Data files (google drive link-Public link).html | 102.4 B | ||
| 1.1 Martin O. L. Hansen - Aerodynamics of Wind Turbines (2008, Earthscan).pdf | 3.3 MB | ||
| 1.2 NREL Phase VI_CFD.pdf | 5.5 MB | ||
| 1.3 NRELPHASEVI.xlsx | 52 KB | ||
| 1.4 Reneable Energy.pdf | 1.6 MB | ||
| 10. Comparing CFD and Experimental data.mp4 | 61.8 MB | ||
| 10. Comparing CFD and Experimental data.srt | 7.3 KB | ||
| 10. Creating transition and base support for NREL Phase VI wind turbine blade.mp4 | 104.7 MB | ||
| 10. Creating transition and base support for NREL Phase VI wind turbine blade.srt | 12.5 KB | ||
| 10. Defining mesh sizes on other parts.mp4 | 31.7 MB | ||
| 10. Defining mesh sizes on other parts.srt | 3.7 KB | ||
| 10. Making a symmetric model of full wind turbine.mp4 | 25.5 MB | ||
| 10. Making a symmetric model of full wind turbine.srt | 6.3 KB | ||
| 11. Results at wind speed = 10 ms.mp4 | 98.1 MB | ||
| 11. Results at wind speed = 10 ms.srt | 11 KB | ||
| 11. Setting maximum elements size in Global mesh setup.mp4 | 13.5 MB | ||
| 11. Setting maximum elements size in Global mesh setup.srt | 2.1 KB | ||
| 12. Part12_Adjusting meshing parameters to get rid of issues in mesh generation.mp4 | 88.1 MB | ||
| 12. Part12_Adjusting meshing parameters to get rid of issues in mesh generation.srt | 13.2 KB | ||
| 13. Deleting volume mesh (Octree).mp4 | 6 MB | ||
| 13. Deleting volume mesh (Octree).srt | 1.2 KB | ||
| 14. Smoothing surface mesh to improve mesh quality.mp4 | 9.9 MB | ||
| 14. Smoothing surface mesh to improve mesh quality.srt | 1.9 KB | ||
| 15. Creating volume mesh using Delaunay method.mp4 | 37.2 MB | ||
| 15. Creating volume mesh using Delaunay method.srt | 5.5 KB | ||
| 16. Density box for mesh refinement - Introduction to density box creation.mp4 | 58.4 MB | ||
| 16. Density box for mesh refinement - Introduction to density box creation.srt | 6 KB | ||
| 17. Density box for surface mesh refinement on interface 3.mp4 | 100.7 MB | ||
| 17. Density box for surface mesh refinement on interface 3.srt | 13.8 KB | ||
| 18. Density box Refining Volume mesh in wake region of wind turbine.mp4 | 62.1 MB | ||
| 18. Density box Refining Volume mesh in wake region of wind turbine.srt | 6.9 KB | ||
| 19. Mesh types in ICEMCFD and definition of Prism meshing.mp4 | 20.2 MB | ||
| 19. Mesh types in ICEMCFD and definition of Prism meshing.srt | 6.1 KB | ||
| 2. Apply 3 deg global pitch angle to NREL Phase VI wind turbine.mp4 | 57.9 MB | ||
| 2. Apply 3 deg global pitch angle to NREL Phase VI wind turbine.srt | 12.1 KB | ||
| 2. Brief overview of course.mp4 | 45.9 MB | ||
| 2. Brief overview of course.srt | 5.8 KB | ||
| 2. Creating volume mesh using octree mesh with density box 1 for surface mesh.mp4 | 66.7 MB | ||
| 2. Creating volume mesh using octree mesh with density box 1 for surface mesh.srt | 11.1 KB | ||
| 2. Importing geometry of inner domain into ICEMCFD.mp4 | 22 MB | ||
| 2. Importing geometry of inner domain into ICEMCFD.srt | 4.7 KB | ||
| 2. Importing inner and outer domain grids into single core Fluent.mp4 | 41.4 MB | ||
| 2. Importing inner and outer domain grids into single core Fluent.srt | 6.4 KB | ||
| 2. Understating flow angles in wind turbine.mp4 | 95.4 MB | ||
| 2. Understating flow angles in wind turbine.srt | 20.8 KB | ||
| 20. Creating Prism Meshing on wind turbine blade.mp4 | 180 MB | ||
| 20. Creating Prism Meshing on wind turbine blade.srt | 19.6 KB | ||
| 21. Adjusting Prism meshing.mp4 | 49.5 MB | ||
| 21. Adjusting Prism meshing.srt | 6 KB | ||
| 22. Setting up boundary conditions and mesh export.mp4 | 36.2 MB | ||
| 22. Setting up boundary conditions and mesh export.srt | 5.8 KB | ||
| 23. Checking mesh quality in Fluent.mp4 | 57.6 MB | ||
| 23. Checking mesh quality in Fluent.srt | 8.2 KB | ||
| 3. Creating assembly of full wind turbine including hub.mp4 | 85.8 MB | ||
| 3. Creating assembly of full wind turbine including hub.srt | 15.2 KB | ||
| 3. Deleting volume mesh and smoothing surface mesh.mp4 | 9.3 MB | ||
| 3. Deleting volume mesh and smoothing surface mesh.srt | 1.4 KB | ||
| 3. Display properties of model.mp4 | 51.3 MB | ||
| 3. Display properties of model.srt | 7.5 KB | ||
| 3. Importing S809 coordinates into Solidworks 2020.mp4 | 66.6 MB | ||
| 3. Importing S809 coordinates into Solidworks 2020.srt | 11.4 KB | ||
| 3. Mesh Display.mp4 | 96.3 MB | ||
| 3. Mesh Display.srt | 13.5 KB | ||
| 3. Problem Description.mp4 | 133.7 MB | ||
| 3. Problem Description.srt | 18.6 KB | ||
| 4. Creating density box 2 for mesh refinement in wake region.mp4 | 42.8 MB | ||
| 4. Creating density box 2 for mesh refinement in wake region.srt | 8.2 KB | ||
| 4. Creating part names in ICEMCFD.mp4 | 38.4 MB | ||
| 4. Creating part names in ICEMCFD.srt | 8 KB | ||
| 4. Creating plan 0 and sketch 0 for making airfoil from coordinates of S809.mp4 | 50.4 MB | ||
| 4. Creating plan 0 and sketch 0 for making airfoil from coordinates of S809.srt | 8.6 KB | ||
| 4. Data extraction from graph.mp4 | 23.6 MB | ||
| 4. Data extraction from graph.srt | 3.5 KB | ||
| 4. Mesh quality and mesh info of NREL Phase VI wind turbine.mp4 | 21.2 MB | ||
| 4. Mesh quality and mesh info of NREL Phase VI wind turbine.srt | 4 KB | ||
| 4. Setting origin on the back side of hub of wind turbine model.mp4 | 24 MB | ||
| 4. Setting origin on the back side of hub of wind turbine model.srt | 5.1 KB | ||
| 5. Creating material point for model in ICEMCFD.mp4 | 23.1 MB | ||
| 5. Creating material point for model in ICEMCFD.srt | 4.8 KB | ||
| 5. Creating point at 30% chord length for defining rotation axis.mp4 | 37.6 MB | ||
| 5. Creating point at 30% chord length for defining rotation axis.srt | 6.2 KB | ||
| 5. Creation of inner domain.mp4 | 53.7 MB | ||
| 5. Creation of inner domain.srt | 8.9 KB | ||
| 5. Maximum element size in domain.mp4 | 15.8 MB | ||
| 5. Maximum element size in domain.srt | 2.7 KB | ||
| 5. Mesh partitioning into 4 partitions and reading case file into Parallel Fluent.mp4 | 29.7 MB | ||
| 5. Mesh partitioning into 4 partitions and reading case file into Parallel Fluent.srt | 4.6 KB | ||
| 6. Adjusting density boxes and creating volume mesh using Delaunay method.mp4 | 98.9 MB | ||
| 6. Adjusting density boxes and creating volume mesh using Delaunay method.srt | 8.7 KB | ||
| 6. Creating square trailing edge.mp4 | 22.5 MB | ||
| 6. Creating square trailing edge.srt | 3.9 KB | ||
| 6. Creation of outer domain.mp4 | 85.9 MB | ||
| 6. Creation of outer domain.srt | 11.7 KB | ||
| 6. Geometry file in ICEMCFD - tin file.mp4 | 17.5 MB | ||
| 6. Geometry file in ICEMCFD - tin file.srt | 2.3 KB | ||
| 6. Setting up turbulence model, cell zone conditions and boundary conditions.mp4 | 34 MB | ||
| 6. Setting up turbulence model, cell zone conditions and boundary conditions.srt | 6 KB | ||
| 7. Creating 21 plans at given radial locations for the blade section.mp4 | 56.9 MB | ||
| 7. Creating 21 plans at given radial locations for the blade section.srt | 6.5 KB | ||
| 7. Creating mesh interfaces between inner and outer domains.mp4 | 16.2 MB | ||
| 7. Creating mesh interfaces between inner and outer domains.srt | 2.6 KB | ||
| 7. Exporting mesh.mp4 | 28.7 MB | ||
| 7. Exporting mesh.srt | 3.2 KB | ||
| 7. Named selection for inner and outer domains.mp4 | 28.3 MB | ||
| 7. Named selection for inner and outer domains.srt | 7 KB | ||
| 7. Topo tolerance settings and build topology for wind turbine geometry.mp4 | 149.1 MB | ||
| 7. Topo tolerance settings and build topology for wind turbine geometry.srt | 21.8 KB | ||
| 8. Changing display properties and colors of geometry in spaceclaim.mp4 | 45.6 MB | ||
| 8. Changing display properties and colors of geometry in spaceclaim.srt | 8.8 KB | ||
| 8. Creating 21 airfoils on 21 plans with given twist angle and chord length.mp4 | 58.1 MB | ||
| 8. Creating 21 airfoils on 21 plans with given twist angle and chord length.srt | 9.3 KB | ||
| 8. Mesh quality.mp4 | 18.5 MB | ||
| 8. Mesh quality.srt | 1.7 KB | ||
| 8. Solver Settings and solution running.mp4 | 73.6 MB | ||
| 8. Solver Settings and solution running.srt | 11.7 KB | ||
| 8. Tri tolerance for geometry.mp4 | 27.8 MB | ||
| 8. Tri tolerance for geometry.srt | 3.6 KB | ||
| 9. Contour and other plots for NREL Phase VI wind turbine.mp4 | 51.8 MB | ||
| 9. Contour and other plots for NREL Phase VI wind turbine.srt | 6.8 KB | ||
| 9. Creating blade section from 21 section using Loft command in Solidworks.mp4 | 40.5 MB | ||
| 9. Creating blade section from 21 section using Loft command in Solidworks.srt | 5.8 KB | ||
| 9. Defining mesh sizes on leading and trailing edges.mp4 | 82.3 MB | ||
| 9. Defining mesh sizes on leading and trailing edges.srt | 11 KB | ||
| 9. Making surfaces from solid body.mp4 | 7.2 MB | ||
| 9. Making surfaces from solid body.srt | 1.7 KB | ||
| Bonus Resources.txt | 409.6 B | ||
| Get Bonus Downloads Here.url | 204.8 B | ||
| Inner.atr | 2.3 KB | ||
| Inner.fbc | 716.8 B | ||
| Inner.fbc_old | 614.4 B | ||
| Inner.prj | 9.1 KB | ||
| Inner.tin | 934.2 KB | ||
| Inner.uns | 11.9 MB | ||
| Inner.uns.bak | 11.9 MB | ||
| NREL Phase VI_bluentTE_finalmodel.SLDPRT | 626 KB | ||
| NREL Phase VI_bluentTE_finalmodel_GlobalPitchAngle3deg.scdoc | 243.7 KB | ||
| NREL Phase VI_bluentTE_finalmodel_GlobalPitchAngle3deg_twobladeshub.scdoc | 459.4 KB | ||
| NREL Phase VI_bluentTE_step1.SLDPRT | 118.3 KB | ||
| NREL Phase VI_bluentTE_step2.SLDPRT | 146.9 KB | ||
| NREL Phase VI_bluentTE_step3.SLDPRT | 211.3 KB | ||
| NREL Phase VI_bluentTE_step4.SLDPRT | 193.2 KB | ||
| NREL Phase VI_bluentTE_step5.SLDPRT | 189.5 KB | ||
| NREL Phase VI_bluentTE_step6.SLDPRT | 476.4 KB | ||
| NREL Phase VI_bluentTE_step7.SLDPRT | 510.3 KB | ||
| NREL Phase VI_inner.scdoc | 461.7 KB | ||
| NREL Phase VI_outer_Domain1.scdoc | 42 KB | ||
| NREL Phase VI_outer_Domain2.scdoc | 40.4 KB | ||
| NREL Phase VI_outer_Domain3.scdoc | 38.5 KB | ||
| Outer.atr | 1.9 KB | ||
| Outer.fbc | 512 B | ||
| Outer.fbc_old | 409.6 B | ||
| Outer.prj | 9.2 KB | ||
| Outer.tin | 31.6 KB | ||
| Outer.uns | 28.3 MB | ||
| Outer.uns.bak | 28.3 MB | ||
| S809_Airfoil.txt | 1.3 KB | ||
| S809_practice.txt | 1.3 KB | ||
| inner.scdoc | 1.2 MB | ||
| outer.scdoc | 217 KB | ||
| points.atr | 307.2 B | ||
| points.fbc | 204.8 B | ||
| points.fbc_old | 204.8 B | ||
| points.prj | 7.4 KB | ||
| points.tin | 2.4 KB | ||
| s809.xlsx | 18.6 KB | ||
| ▲ 180 total files | |||
NREL Phase VI Wind Turbine CFD Analysis and Validation
https://DevCourseWeb.com
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English + srt | Duration: 66 lectures (6h 52m) | Size: 3.35 GB
You will learn to use SolidWorks, Spaceclaim, ICEMCFD and Fluent to make CFD analysis of Horizontal Axis Wind Turbine
What you'll learn
Simulate the NREL Phase VI wind turbine case
Student will be able to simulate any type of wind turbine after attending this course
You will acquire skills in creating CAD model of horizontal axis wind turbine
You should be able to get accurate results for NREL Phase VI using skills taught in this course and also any other wind turbine
Requirements
Good understanding of using ANSYS (ICEMCFD, Spaceclaim, Fluent) and solidworks software. Although we will start from scratch but some basic working knowledge will be highly helpful.
Computer with at least 32 GB RAM and i7 processor with good graphics card.
LED monitor with size of 23 inch or more preferably 29 inch to properly visualize the results.
Basic knowledge of wind turbine theory
Basic knowledge of CFD and application on some simple CFD problems such as Airfoil or flat plate CFD
All Comments